GSE Temperature & Min Max Hysteresis Speed Controller

£99.96 (ex. VAT)
GSE Temperature & Min Max Hysteresis Speed Controller The fan controller keeps the temperature constant and features controls for minimum and maximum fan run speed and hysteresis settings.
PayPal Checkout
You will earn 119 points with this purchase

GSE Temperature & Min Max Hysteresis Speed Controller

GSE Temperature & Min Max Hysteresis Speed Controller. The Ideal temperature for your plants to thrive is around 20-22c.

Temperatures above 28-30C are detrimental to your plants' health and growth will slow down considerably.

Humidity requirements vary through a plant's life but as a general guide in vegetative growth aim for around 60-75%, reducing this with the onset of flowering to around 50-55%.

This product is carefully chosen selection of products to help with monitoring and maintaining these desired parameters.

The digital fan controller is a temperature dependent speed controller for rooms with air flow in and out. The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. It can be easily controlled, adjusting the required temperature, minimum speed and the pressure of your room on four knobs. This fan controller can by used also as only air out regulator on two fans if there is a nature way of air in.

The controller comes as a finished part and is ready to use. This reliable fan controller comes complete with a sealed water resistant cover, plugs with flap-lids and a low voltage sensor making it perfect for humid rooms. The sensor comes with a 4meter long cable and can be extended up to 50meters.

Sizes and technical data's:
Case:  WxHxD = 130x80x70mm
Controller: WxHxD = 160x100x90mm
Designed for: 2x600W / TRIAC 2x25A
Volts: 230V / 50HZ
Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Protection class IP44
2.5 Amp
Suitable for 1 x Fan
product review overlay image

Customer reviews

No reviews left yet
Write a review

No reviews have been left for this product, be the first to leave a review