G-tools Bonanza Grow Cabinet - 400w LED
The best light distribution over a growing surface is obtained by working with beams or “bars”. In bars, the LED diodes are mounted on aluminum profiles that are mounted on a frame at equal distances from each other.
The bars are relatively long, so the LED diodes are far apart. This structure and the wide-angle at which the light is emitted allows the bars to hang very close to the plants without damaging them. In this way you limit “transport loss” and you get the best possible return from the lamp.
To hang the G-bars 170 Watt lamps, mounting points are mounted in the ceiling. With the supplied “Light Hanger” pulley set, you can adjust the lamps in height and thus always maintain the perfect distance from the plants.
Jeroen’s online cultivation report proves that we didn’t take any chances when choosing this lamp.
Energy-efficient and multi-functional
The G-bars 170 Watt LED grow light is equipped with a dimmer with 4 positions. You can use this to set the lamp to 40,60,80 or 100% of the total power. This is a handy feature because plants need less light in the early stages of the growing cycle than at the end. As the plants grow, you give them more and more light by turning the dimmer up a notch. With the dimming function, you can therefore give your plants the right amount of light for every phase of their life. You not only create a more pleasant climate for the plants, but you also save on your electricity costs.
The dimming function also makes it possible to grow plants with different light needs. Flowering, fruit-bearing plants often need much more light than non-flowering plants such as leafy greens and herbs.
The full spectrum of the G-bars makes the lamp suitable for both growing and flowering plants.
The indestructible hull of the Bonanza 1m2 consists of aluminum profiles, plastic insert connectors, and PVC/XPS sandwich panels.
Together, these form a rock-solid construction that guarantees a lifetime of hassle-free growing.
The sandwich panels designed by us have great light-reflecting and heat and sound insulating capacities. In contrast to the smaller Bonanza 0.35 model, the cabinet has sliding instead of swing doors. These provide ample access to the plants but do not take up any extra space when opened. This makes the Bonanza grow box suitable for use in any interior.
Extractor, filter and silencer
To remove warm air from the cabinet, the Bonanza 1m2 is equipped with a compact GT 125 2-speed fan. This powerful air extractor has sufficient capacity to cool lighting systems up to 600 Watts. The extractor is connected to a PK K2601 carbon filter via a ducting hose. The air is therefore first sucked through the filter and cleaned of unwanted odors before it is blown out of the cabinet. Because the air extractor is mounted on a special silencer, the noise of the outgoing airflow is kept to a minimum. 45Db with closed doors at 1-meter distance.
With continuous use, the carbon filter will be saturated after about a year and must be replaced. This is very easy to do yourself. On our youtube channel, you will find a demonstration film on how to do this.
You will find the filter and the extra long cable ties for installation in our webshop.
G-tools air inlets
When the extractor is running and the doors are closed, negative pressure is created and unfiltered air cannot escape from the cabinet. Due to the negative pressure, fresh, CO2-rich air is continuously drawn into the cabinet via 6 G-tools air inlets. These inlets are installed at the bottom of the back wall of the cabinet and function as a labyrinth that lets air in but no light out. The filter, the point where the air is drawn in, is located at the front of the ceiling. The air is thus drawn through the box diagonally, past the plants, before it is filtered and blown out. The cabinet can blow out directly in the room where it is placed. The Bonanza 1m2 grow box does not need to be connected to any duct that has to be led outside.
Wi-Fi Smart Box
A Wifi Smartbox is mounted on the ceiling of the Bonanza 1m2 grow box. This distribution box has four sockets for the electrical equipment in the grow box. Two of these contacts have continuous voltage, one of which is used for the air extractor.
The other two contacts can be programmed via a free downloadable app and can be used to control the lighting and an irrigation system. When the app is installed on your smartphone, you can set the times at which the lamp and pump switch on and off from anywhere in the world
If you do not have a WiFi signal where the cabinet will be placed, you can manually switch on these two contacts permanently and use an analog time clock.
Size (h x w x d): 176 x 118 x 78
Material: PVC/XPS/PVC sandwich panels
Surface: ~1 m2. Space for 15 x 6,5 ltr pots, 8 x 11 ltr pots.
Ventilation: G-Tools 125 2-speed fan – 230/360M3 per hour
Filter: Prima Klima K2601, 360m3
Timer: Wifi Smartbox
Lights: 2 x G-bars 170W dimmable
Warranty: 1 year on all technical parts
14-28 day delivery on this item