Ecotechnics CoolTube Air cooled Reflector
Ecotechnics Cool Tube Air cooled Reflector
The Coolshade reflector is an air-tight, fully sealed clear glass tube based reflector with a lamp mounting bracket in its centre. It’s perfect for removing the excess heat generated by HID grow lights without leaking unpleasant odours. Always use your Coolshade Reflector with an air extraction system and ducting to transport the heat from your lighting out of your growing environment. As far as are aware the Coolshade Reflectors are the only fully sealed lighting system on the market.
Simple and very effective way of ensuring you chosen lamp runs cool enabling it to be positioned directly above the plant without the risk of heat damage.
These brilliant light fittings take 90% of the heat away from your plants so you can control your environment easily and achieve maximum rated lumen delivery from your lamps.
just attach a new or to your exsisting fan to aircool these lights.
Most lamps should be mounted at least 10" above plant canopy to reduce chance of scorching. Now you can let your plants touch the glass of this reflector without the worry, watch your flowers burst with life as they soak up all that normally wasted high lumen light.
Installing your Reflector above your plants: The minimum safe distance between your lamps and the top of the plants below are as follows-250watt HID lamp: minimum 20cm400watt HID lamp: minimum 50cm600watt HID lamp: minimum 60cm.
If you run 2 rooms then run 1 at night and one in day , vent heat from lights into room thats off to sustain constant temps.
- 5in version: 125mm width
- 6in version: - 150mm width
Works with all wattage ballasts,