Buffers, Calibration, Cleaners

Essentials Meter Store It's difficult to exaggerate the importance of maintenance and storage solutions. Expensive equipment is often utilised well below its full capabilities due to lack of proper maintenance of sensors.

Essentials Calibration Solutions, necessary to calibrate pH & EC/CF meters, For super accurate calibration use these solutions at 25 degrees centigrade and never keep an opened bottle for more than 6 months.

Vitalink Essentials pH 7.01 buffer - 250ml & 1l For super accurate calibration of your digital ph meters and probes

Growth Technology EC  standard calibration fluid 2.76 ms/cm used for calibrating ec pens and metres, ec metres should be calibrated regulary to ensure accurate and precise readings!

Growth Technology EC  standard calibration fluid 1.413 ms/cm used for calibrating ec pens and metres, ec metres should be calibrated regulary to ensure accurate and precise readings!

Growth technology PH Buffer 4 is used to calibrate pH meters. This should be done on a regular basis to ensure ongoing accuracy from the meter.

Growth technology PH Buffer 7 is used to calibrate pH meters. This should be done on a regular basis to ensure ongoing accuracy from the meter.

growth technology Ph Probe refill & storage solution. This s ph probe refill and storage olution can be used to store pH meters when not in use

growth technology Probe cleaning is one of the most important parts of owning and operating any pH meter, monitor or controller. If the probe is contaminated or dirty, it affects the accuracy of the reading displayed.

Essentials Lab Ph Buffer 4 Essentials LAB Buffer 4 is an ideal solution for calibration of pH meters at pH4. Regular calibration will keep your pH meter reading accurately.  

Essentials Lab Ph Buffer 7 Essentials LAB Buffer 7 is an ideal solution for calibration of pH meters at pH7. Regular calibration will keep your pH meter reading accurately.  

Essentials Lab EC Meter Calibration Solution Essentials LAB EC Meter Calibration Solution is intended for use in calibrating EC meters to CF 28 – EC 2.80 – PPM 1820. Regular calibration will keep your EC Meter reading accurately

Bluely Probe Ph & Calibration cleaning kit Everything you need to clean, hydrate and calibrate pH probes as well as clean and test conductivity (ppm/EC) probes

Ecothrive Neutralise - water treatment, Neutralise instantly dechlorinates tap water, protecting beneficial microbes from the harmful effects of both chlorine and chloramine. It's ideal for conditioning tap water before adding microbial products such as Biosys.