Aquavalve Autopot Valve - 4mm
Autopot Aquavalve Valve - 4mm
The AQUAvalve is supplied with all the AutoPot tray systems. Once connected to the water supply the AQUAvalve will control the flow of water to the plants, by simple gravity pressure from a tank or reservoir, no pumps, electricity or timers are required.
The AQUAvalve will open and allow water to fill the tray, to a pre-set level of 20mm. When the level is reached the AQUAvalve will shut off and prevent any further water from entering the tray until all the water has been consumed by the plants sitting in the tray. When all the water has been exhausted and the tray is empty the AQUAvalve will re-open and allow more water to enter the tray.
As the plants grow larger the AQUAvalve will open & close more often & will perform in accordance with the plants needs. By filling the tray and then allowing it to completely empty before it is re-filled, allows the plants to go through a wet & dry cycle. At AutoPot we call this technology PCI or "Plant Controlled Irrigation".
uses 4mm pipe (6mm outer)