Lumatek Ultimate Pro 400v Digital Ballast - Controllable

The Lumatek Ultimate Pro 600 has been specifically designed to help the hobby grower access the benefits of using electronics to control and power both 240V MH/HPS and professional 400V HPS horticultural lamps. The Lumatek Ultimate Pro automatically detects the lamp connected and then powers that light. A Lumatek 600W 400V HPS lamp is supplied with the ballast. The 400V lamps are superior to the 240V lamps traditionally used in the hobby hydroponics and indoor garden markets due to their increased efficiency and greater PAR spectrum output. Photosynthetic Active Radiation (PAR) refers to the part of the light spectrum that plants actually use to photosynthesize and make energy to grow.

Using microprocessor and software controlled electronics, the Lumatek Ultimate 600 is an ultra-high frequency ballast operating at 120KHz (120,000 cycles per second) for 400V and 90KHz for 240V lamps. A conventional magnetic ballast operates at 50Hz, making much less light available to the plant. You can see the difference in quality of light yourself using the video camera on your phone, try filming a light powered by a magnetic ballast (strobe flicker) and then the Lumatek (solid light). This increased efficiency means less power is lost from the power supply to the lamp. The high frequency output results in low power loss at the cathodes in addition to better overall power management and energy efficiency.

The Lumatek Ultimate 600 is a remote electronic ballast that will plug into standard 240V mains supply and power 600W 400V HPS and 400W/600W 240V MH/HPS grow lamps. This ballast has an IEC connector on the lamp cable and can connect to any regular reflector. This intelligent digital ballast can easily integrate into your existing grow room; simply replace your ballast with the Lumatek Ultimate 600 and it will automatically detect which type of lamp you are using and provide precise voltage required for optimum PAR spectrum output. If you are powering a 600W 400V grow lamp, you will instantly achieve more useable grow light! More light = more yield! 

Features:
• Voltage regulator precision; as well as automatically detecting which voltage lamp is being used, the microprocessor and software controlled electronics monitor and sense the lamp and it's current state of degradation ensuring the lamp receives the precise voltage necessary to achieve optimum PAR spectrum output (the actual part of light that plants use to photosynthesize) regardless of mains supply voltage fluctuations.
• Soft Start; when ballast is switched on, the software controlled electronics manage and control inrush current so as to prevent initial surge tripping circuit-breakers and protect and enhance lamp-life. The ballast will bring the lamp to full brightness within three minutes.
• Sequential switching; the ballast detects other ballasts on the same ring circuit. When used in an automated system, the ballast will start independently rather than simultaneously so as to manage the electrical load prevent circuit-breakers from tripping.
• Soft dim; when the ballast output power is changed, the regulator software controls the change in power so that it is gradual, thus reducing stress on the lamp and improving lamp-life.
• Circuit protection and Auto-restart; the ballast will detect power surges, short circuits, circuit-interruption, over-heating and switch off to prevent any damage to the lamp or the ballast. To protect against hot re-strike, the ballast will monitor and sense when the lamp is ready to be reignited and will then restart automatically.
• End of lamp-life; the ballast will monitor and sense when the lamp is coming to the end of it's useable life and will not attempt to ignite it thus avoiding negative spectral and colour anomalies.
• No noise; the Lumatek ballast is completely silent and produces no vibration due to using the graduated fin design of the case as a heat sink which negates the need for an internal fan.
• Less heat; the ballast is extremely efficient and very little energy is lost as waste heat.
• Lightweight; the ballast is compact and light, weighing under 3KG making it easy to position and mount. 

Key Specifications:
Lumatek Ultimate Professional 600W 400V Electronic Ballast for use with 400V and 240V HPS/MH Horticultural Grow Lamps
Lumatek 600w 400V Lamp supplied inside the ballast box (Optional).
Size L x W x H (mm): 310 x 114 x 81
Weight (Kg): 3.0
Case: Graduated Fin Aluminium
Dimming Range (W): 400W - 400SL - 600W - 600SL (SL = ~10% boost)
Mains Supply Voltage: 240V 50Hz
Input Current Max (A): 2.96 (When in SL - 711W)
Input Power (W): 630
Output Power (W): 600
Operating Frequency (KHz): 120
Power Factor: 0.99
THD(%): <7
Full circuit protection; open/short, over temperature, over/low voltage, end of lamp life/rectification
EMI suppression certified

Lumatek Pro Digital Ballast 1000w 400v Controllable

This is our most powerful intelligent 1000W ballast which integrates the proven and reliable Lumatek technology and with an addition of Control capability. The LUMATEK Pro 1000W 400v Controllable has been developed to connect to 240V power supply and light 600/750/1000W 400V HPS grow lamps. 

400V grow lighting is now standard in professional horticulture because of the extra PAR/PFF (grow light) produced with greater efficiency and lower energy costs. Improved PAR Light ensures a constant and uniform plant growth.

Developed to meet professional standards & main requirements of the grower:
• Additional PAR/PFF - up to 10% more grow light
• More light = more yield/revenue
• Improved PAR Light Output maintenance
• Highest System Efficiency
• High reliability
• low energy costs
• Affordable price - little more than standard 240V equipment
• Connect to 240V power supply and light 400V Double Ended horticultural grow lights

Lumatek use the latest electronic components to improve performance & efficiency to reduce the cost of high-end professional equipment for the end user.

Lumatek Pro ballasts are tested and compatible with 400V DE HPS lamps from all leading manufacturers including Phillips. Comparison testing has demonstrated up to 10% more PAR/PFF than standard horticultural lamps with improved PAR light maintenance levels.

Lumatek have a proven reputation for reliability and performance. The Pro 400V series provide affordable professional grow lighting solutions to the indoor grow market.
The new addition of Control capability allows you to easily monitor and regulate your grow room environment (Lighting timming, sunrise/sunset, digital 1% dimming, etc). By simply connecting the Lumatek Digital Panel (sold separately) into the TRS “Link” port on your controllable ballast. 

Lumatek Ultimate 1000w 400v Ballast Key Specifications 
Size L x W x H(mm): 318 x 166 x 96
Weight (Kg): 4.9
Case: Graduated Fin Aluminium
Dimming (W): 600W - 750W - 1000W – Super Lumens (115%)
Mains Supply Voltage: 240V 50Hz
Input Input Current Max (A): 5.1
Input Power (W): 1200
Output Power (W): 1150
Operating Frequency (KHz): 125
Power Factor: 0.99
THD(%): <10
Efficiency(%): 96
Mains Voltage Range(V): 175 – 275
Lamp: 600W, 750W, 1000W HPS
Full circuit protection; open/short, over temperature, over/low voltage, end of lamp life/rectification
EMI suppression certified