4mm Irrigation Fittings

4mm Barbed Tee High Quality fittings, simply plug together to make the drip feed system to suit your needs. suitable for air and water pipes.

4mm Barbed Plastic Elbow 4mm Barbed Elbow High Quality fittings, simply plug together to make the drip feed system to suit your needs.

4mm Pipe Stake - keeps dripper line in the air, 4mm Pipe Stake Support

4mm Barbed plastic pipe Joiner High Quality fittings, simply plug together to make the drip feed system to suit your needs.

4mm Barbed Plastic Cross Connector, 4mm Barbed Cross High Quality fittings, simply plug together to make the drip feed system to suit your needs

4mm Blue Dripper Steak, Replacement or Diy Drip feed stakes, perfect for diy and home made hydroponic systems suitable for water and nutrients.

4mm Plastic End Stop are used to block unwanted holes in low-density poly tube. The 4mm goof plug will block any hole less than 4mm in diameter.

4mm 360 degreAdjustable dripper on 1/4" barb with flow rate of 0-40lph - Adjustable drippers allow the option of changing the flow for each individual plant.

4mm Barbed Inline Plastic Valve The 4mm barbed inline valve is best used with the 4mm delivery pipe. They are useful for resricting the flow of nutrients going to single drippers.

4mm Adjustable Dripper on Stake., When the cap is rotated the flow from this dripper and the radius of the wetted area can be adjusted from a gentle stream patte, to drip, to off.

13mm - 4mm reducer barbed inline T piece,Irrigation pipe and fittings can be used when you need to water and feed multiple plants at the same time.

13mm to 4mm cross Connector Irrigation pipe and fittings can be used when you need to water and feed lots of plants at the same time. They are great for pot culture, drip systems,

13mm - 4mm x 4 Cross plastic Connector Irrigation pipe and fittings can be used when you need to water and feed lots of plants at the same time. They are great for pot culture, drip systems,

Wilma 13mm - 4mm 4 x Outlet Manifold reducer plastic Connector Irrigation pipe and fittings can be used when you need to water and feed lots of plants at the same time. They are great for pot culture, drip systems,

Vari Rotor Sprinkler -  Amazon Replacement Sprinkler - an adjustable sprayer that can increase and decrease the volume of flow

4mm 8 Outlet Manifold to 3/4" MBSP Screw - 3/4" outlet screw M.BSP to 8 outlet 4mm pieces, high quality black plastic fittings. connects to 4mm air or water pipe and 3/4" Fbsp Nut fitting

AutoPot 4mm Filter - Membrane Included, multi purpose, 4mm fitting, filter sponge is removable for cleaning. ihg quality black plastic, filter sponge included. deisgned for use with the autopot

Autopot 13mm - 4mm Filter Reducer The 13mm-4 mm inline filter allows easy connection to 13mm pipe. The filter then reduces to 4mm allowing easy connection to any AutoPot Watering Systems of between 1 and 6 modules

4mm Top Hat Rubber Grommet

4mm Top Hat Rubber Grommet

Black Cable Gland M12 Cable gland for use where a cable entry is needed through an enclosure, wood, metal etc. Suitable for water pipe or electrical cable

M32 grommet - provides a water and dust tight seal. Act as a blanking plug until cable is installed Withstand vibration

4 Way 4mm Dripper Pipe Steak & Manifold kit Allows you to split 1 x 4mm pipe line in to 4 x 4mm pipe lines for water dripper systems in pots hydroponics ore irrigation.
 

The Neta 2 Piece Snap Drippers are designed to be easily separated for cleaning. Two part dripper that can be separated for easy cleaning