The OptiClimate water-cooled air conditioner is the only true total solution for indoor climate control. It can cool, heat, dehumidify, filter and circulate air.
Most complete stand alone climate system
Cooling, heating, dehumidifying, circulating and filtering air with a single appliance
Water cooled, you don’t need external chillers
Fully automatic because of the light sensor;
set temperatures and ready to go!
Built-in temperature and water leakage safety switch
The OptiClimate is a climate control system that was developed independently, resulting in a fully optimised and efficient product, which can be used to control the indoor climate perfectly while using as little energy as possible.
The OptiClimate cools the air using water as coolant and heats it by means of ceramic heaters.
The OptiClimate has a water inlet and outlet, and the inlet is connected to the cold water supply. While the cold water is used to cool the air, it is heated to 35-50 °C. It is then discharged to the sewers through the water outlet, with an optional pipe branching off to supply a feeder tank.
The included remote is also a controller which allows all the processes to run fully automatically and be monitored at the same time. Once the minimum temperature (night) and maximum temperature (day) have been set using the remote, the OptiClimate will either heat or cool, depending on the night or day setting, ensuring the preset temperatures will not be exceeded. The night or day setting is controlled by a light sensor.
On the day setting (cooling), the Opticlimate also dehumidifies. If required, using the included humidistat, the Opticlimate can also dehumidify when it is on the night setting, thus lowering the humidity.
Why a water-cooled OptiClimate
Perfect climate control in summer and winter; you no longer have to depend on the temperature outside. The result: ideal temperatures, even during a heat wave.
Since water is used for cooling instead of air, you will use less energy (more efficient), and you will no longer need an outside unit.
You will also achieve the best possible air distribution across the room, which results in an even temperature. The growing results each cycle will not only be excellent; they will also be consistent. he temperatures can be exactly adjusted to your wishes and will be continuously maintained.
Due to the use of water as cooling medium, it is not necessary to draw in large amounts of air and discharge the heated air.
Since the space being used is almost closed off completely, it is less likely that mould, bacteria or dust will enter the space through the inlet.
You don’t need (repulsive) external chillers anymore!
Where other climate control systems stop, the Opticlimate PRO 3 series goes on …