The Com-100 Combo tEc and temperature meter is a very handy and reliable piece of kit, it measures the water in various formats as well as monitoring the temperature, it has built in digital calibration and an auto on/off function.
FEATURES
Measures electrical conductivity (EC), total dissolved solids (TDS) and temperature.
UPGRADED: Four scales: µS, mS, ppm, ppt (mS and ppt are new)
Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl).
Automatic Temperature Compensation (ATC) using three temperature coefficients
Waterproof housing (IP-67 rating)
Measurement Range: 0-9990 µS; 0-8560 ppm; 0-9.99 mS; 0-8.56 ppt
Digital Calibration (push button) to any point within the meter's range
Auto-off function, data-hold function and low-battery indicator
Display: large and easy-to-read LCD screen includes simultaneous temperature reading.
Replaceable Sensor (model SP-C1)
Factory Calibrated: The COM-100 meter is calibrated with a 1413 µS solution. The meter can be recalibrated with digital calibration using the push buttons, rather than a screwdriver.
Includes a cap, batteries and lanyard.
See how the COM-100 stacks up against the competition.
Need help deciding which meter is right for you? View our TDS/EC Meter Selection Guide.
SPECIFICATIONS
EC Range: 0 - 9990 µS; 0 - 9.99 mS
TDS Range: 0 - 8560 ppm (mg/L); 0 - 8.56 ppt
Temperature Range: 0-80 °C; 32-176 °F
Resolution: 0-99: 0.1 µS/ppm/mS/ppt; 100-999: 1 µS/ppm; 1000-9990: 10 µS/ppm. Temp. resolution is 0.1 °C/F
Accuracy: +/- 2%
EC to TDS Conversion Factor: Non-linear conversions for KCl, 442TM or NaCl solutions, selected by the user.
Calibration: Digital calibration by push button.
Probe: Detachable platinum electrodes
Housing: IP-67 Waterproof (submersible; floats)
Power source: 3 x 1.5V button cell batteries (included) (model 357A)
Dimensions: 18.5 x 3.4 x 3.4 cm (7.3 x 1.3 x 1.3 inches)
Weight: 90.7g (3.2 oz)
.jpg)
