How to get the best results from Hydroponics

How to get the best results from Hydroponics

How do you get plants to grow faster, bigger and better AND at a low cost? well you’ll need to use some techniques that will help you get the most from your hydroponic system. If you are new to this method of growing your indoor plants, you should take note of these tips so that your plants will optimally develop and ripen to mature fruit or vegetable plants.

Lets take a look at some of the best tips on how to get the most from your indoor grow

1.    To get the best results from your hydroponic system you must control and monitor the feed system temperature that you are using very closely. A hotter solution of nutrients will result in lower oxygen levels. To achieve optimum oxygen, maintain the solution temperature between 18oC and 20oC. This will provide you with outstanding growth rates and will also thwart root disease. There are a variety of aids to help you control and monitor temperature; you can purchase a digital thermometer for nutrients, a nutrient heater, and a temperature monitor.

2.    You should also pay close attention to the water levels in your hydroponic system. If you maintain an adequate water level, the nutrient strength as well as the pH level won’t decrease as quickly. This means that your system will experience fewer problems, resulting in better plant growth.

3.    It is very important to monitor the nutrient strength by using the Bluelab CF Meter that is designed to assist you. This meter tells you the amount of dissolved salts in the solution used for feeding the plants. Keep in mind that an exact CF is dependent upon the type of plant that you are growing. The stronger you make the nutrient feed you are delivering to plants, the higher the CF levels will be. These levels are very important because you don’t want to over-feed your plants.

4.    It’s also important to monitor the pH levels in your nutrient feeds. This impacts how well your plants can absorb the nutrients you are delivering. If the pH levels are not within an acceptable range, your plants can experience nutrient deficiency. For most hydroponic systems the proper pH level will be from 5.5 to 6.5 this level will give your plants the right balance that they need to grow and thrive successfully. Tools that can help you with these readings include a pH meter and a pH pen.

5.    Finally, you should use the correct nutrients for your plants. Avoid organic ingredients like seaweed or molasses. Use mineral nutrients that are clean and unaffected by oxygen levels. It is important to use nutrients that are recommended for your hydroponic system specifically. By using only recommended nutrients you can avoid a blocked pump, lower oxygen levels, and fermentation and foam that can damage your system.

If you follow all of the above then you will have the perfect plants everytime!

www.hg-hydroponics.co.uk

0 Flares Twitter 0 Facebook 0 Filament.io 0 Flares ×

Leave a Reply

Your email address will not be published. Required fields are marked *


0 Flares Twitter 0 Facebook 0 Filament.io 0 Flares ×