Autogrow Intellidose 4 x Solenoids

To be used in conjunction with Autogrow Intellidose or Nutridose

In order to have a complete pH & TDS/EC dosing system you need to purchase the Intellidose Complete, either the 4-Part Solenoid Board or the Peristaltic Triple Pump Set, at least one pH Stock Tank Kit or Acid Tank Fitting Kit, and either a set of 1-Part Nutrient Stock Tank Kits or Nutrient Tank Fitting Kits (one kit for each nutrient part i.e. 2 kits for a 2-part nutrient or 3 kits for a 3-part nutrient). You will also need to "tee" off of your existing water pump (if it is strong enough) or purchase at least a 200 gph

4-Part Solenoid Board: Includes 4 Solenoids, mounting board and all hardware. After placing the nutrient stock tanks on a shelf, you would mount the solenoid board to the wall below the tanks. You would then attach the tubing (included) from the stock tanks to the top of the solenoids. You would also attach a tube from your pH stock tank to one of the solenoids. Then, you run tubing from the bottom of the solenoids directly to your reservoir. When the reservoir needs nutrients or pH up or down, the solenoids click open for a defined period of time, allowing the nutrients or pH adjusters to flow from the stock tanks, through the open solenoid valves, into the reservoir


£6.99 P&P